|
|
|
Sturdy
U-Channel Posts for use with .063
and .080 aluminum signs.
These 2 lb. steel posts have 3/8"
diameter holes on center for
sign mounting. Green color only. Prices
listed are per item.
|
| Cat.
# |
Size |
|
UPST-6
|
6
ft. |
|
UPST-8
|
8
ft. |
|
|
|
U-CHANNEL
SIGN POSTS HARDWARE |
Hardware
Kit for mounting signs on U-Channel Posts
includes
two - 2" bolts, four nuts and four flat
washers.
UPST-KIT
|
|
|
|
SIGN
GUARDIAN®
SIGN
MOUNTING SYSTEM |
|
Finally!
– simple sign-mounting hardware that makes
it easy to
attach signs and banners to chain link fences.
With the new
hardware system designed by Sign Guardian®,
your signage
will be safer and more secure. Heavy-duty plastic
anchors fit
snugly to 2” chain-link fences, preventing
movement from wind,
child tampering, or vandalism. One-way security
bolts have a
specially designed head that makes installation
easy, but removal
nearly impossible for vandals. Bolts can be easily
removed only
with a specially designed tool or bit. It’s
easy for just one person
to install from one side of the fence. Useful
design allows vertical
and horizontal travel to align holes. Recessed
nut retaining system
mounts flush for added safety, especially in high-traffic
areas.
|
|
|
| Cat.
# |
Size |
|
SG-1
|
(for
signs with 3/8" holes) |
|
SG-1024-8-X
|
(for
signs with 3/16" holes) |
|
|
Plastic
unit fits any standard 2” Chain Link Fence.
Kit includes plastic unit,
nut, mounting screw and specially designed one-way
bolt. Hardware can be
mounted to the front of the fence for use on Privacy-Screen
Fencing.
|
|
|
SIGN
GUARDIAN®
SIGN
REMOVAL TOOLS |
SG-RT |
SG-BIT |
|
Signs
and banners that you have securely mounted to
fences and poles may need to
be taken down or re-mounted in a new area. Use
the Sign Guardian® special
Removal Tool to easily unscrew the bolts
that keep your signs safe from vandals.
The special head makes sign removal a snap.
Also available the Sign Guardian®
specially crafted Drill Bit, which is
designed to attach to any standard electric
drill.
|
|
|
SIGN
GUARDIAN®
FIRE
EXTINGUISHER MOUNTING SYSTEM |
Safe
Guard Signs®
now gives you an easy and convenient
way to mount your mandated fire extinguishers
to chain link
fences. Sign GuardianTM
Fire Extinguisher Brackets fit standard
chain link fences and mount in minutes using
only a simple
wrench. The slide-in-place design allows for
easy mounting or
removal of the extinguisher with no protruding
bolts or sharp
edges to cause injury. Standard hex head bolt
for easy on-off.
Supports all mandated fire extinguishers.
|
FXB-1
Holds 10-15 lb extinguishers.
|
FXB-2
Holds 15+ lb extinguishers.
|
|
|
|
|
SIGN
GUARDIAN®
ORNAMENTAL
FENCING MOUNTING SYSTEM |
|
|
|
|
Safe
Guard Signs®
is now offering the new SG-O, a revolutionary
system designed by Sign GuardianTM
for mounting signs on
ornamental fencing. The SG-O’s stepped
design allows sign
mounting on any of the commmon size pickets
used in ornamental
fencing: 1, 3/4, and 5/8 inches. There is
no need for drilling or
bolting and there is no damage to the fence.
It’s attractive,
easy to install, tamper-resistant and secure.
|
SG-0-2
2-pack with hardware
|
SG-0-X
10-pack with hardware
|
|
|
SMP-7 |
|
|
